Fiber Lazer Kesim Parametreleri

Cutting Parameters of Different Laser Power

(mm) IPG700
(100*125)
Raycus750
(100*125)
IPG1000
(100*125)
Raycus1000
(100*125)
IPG1500
(100*125)
Raysuc1500
(100*125)
IPG2000
(100*125)
Raycus2200
(100*125)
IPG3000
(100*150)
Raycus3300
(100*150)
IPG3000
(100*200)
Raycus3300
(100*200)
Raycus6000
(WSX NC60)
(m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min) (m/min)
Caborn Steel O2 1 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16
2 3.0-4.5 3.0-4.0 5.0-6.0 5.0-6.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0 5.0-8.0
3 2.0-3.0 2.0-2.5 2.5-4.0 2.5-3.5 4.0-5.0 3.5-4.5 3.5-4.0 3.5-4.0 3.5-5.0 4.0-4.5 3.5-5.0 4.0-4.5 3.0-5.0
5 1.0-1.5 1.0-1.5 1.5-1.8 1.2-1.8 1.5-2.0 1.5-1.8 2.5-3.0 2.0-3.0 2.5-3.6 3.0-3.5 2.5-3.6 3.0-3.5 3.0-4.0
6 0.5-1.0 0.5-1.0 1.2-1.6 1.0-1.5 1.5-1.8 1.3-1.5 1.8-2.5 1.8-2.2 2.4-3.0 1.8-2.2 2.4-3.0 1.8-2.2 2.5-3.5
8 0.5-0.8 0.5-0.8 0.8-1.0 0.8-1.0 1.0-1.5 1.0-1.2 1.3-1.5 1.2-1.8 1.8-2.4 1.8-2.2 1.8-2.4 1.8-2.2 2.0-2.8
10 0.5-0.7 0.5-0.7 1.0-1.3 0.7-1.0 1.2-1.5 1.2-1.5 1.2-1.8 1.1-1.3 1.2-1.8 1.1-1.3 1.0-2.1
12 0.4-0.6 0.4-0.6 0.8-1.0 0.6-0.8 1.0-1.5 0.7-1.0 1.0-1.5 0.8-1.0 1.0-1.5 0.8-1.0 1.0-2.0
14 0.6-0.8 0.5-0.7 0.6-1.0 0.6-0.9 0.6-1.0 0.6-0.8 0.6-1.0 0.6-0.8 0.8-1.0
16 0.5-0.7 0.5-0.7 0.6-0.8 0.5-0.8 0.7-0.85 0.5-0.8 0.7-0.85 0.5-0.8 0.7-0.9
18 0.4-0.7 0.4-0.6 0.6-0.75 0.5-0.7 0.6-0.75 0.5-0.7 0.7-0.8
20 0.5-0.65 0.4-0.6 0.5-0.65 0.4-0.6 0.6-0.8
22 0.3-0.5 0.3-0.5 0.3-0.5 0.3-0.5 0.5-0.7
25 0.4-0.6
Stainless Steel N2 1 16-22 16-20 25-28 20-24 40-45 25-30 25-30 25-30 35-50 35-45 12-20 12-20 50-70
2 2.5-5.0 2.5-4.5 7.0-8.0 6.0-7.0 16-18 9.0-10 10-14 10-11 14-18 12-14 9.0-12 8.0-12 30-40
3 1.5-2.0 1.5-2.0 2.0-3.0 2.0-3.0 3.0-4.5 4.0-5.0 5.0-6.5 5.0-6.0 7.0-10 8.0-9.0 7.0-10 8.0-9.0 14-20
4 0.8-1.2 0.8-1.2 1.0-1.5 1.0-1.5 2.0-2.8 2.0-3.0 3.0-4.0 3.0-4.0 4.0-6.0 4.0-5.0 4.0-6.0 4.0-5.0 6.0-12
5 0.5-0.8 0.5-0.8 1.3-1.8 1.0-1.5 1.5-2.5 1.5-2.0 2.5-4.0 2.5-3.3 2.5-4.0 2.5-3.3 5.0-10
6 0.6-0.8 0.7-1.0 1.2-1.5 1.2-1.5 1.8-2.5 1.6-2.1 1.8-2.5 1.6-2.1 4.0-7.0
8 0.6-0.8 0.6-0.8 1.2-1.8 0.9-1.2 1.2-1.8 0.9-1.2 3.0-5.0
10 0.7-0.9 0.6-0.8 0.7-0.9 0.6-0.8 1.5-2.5
12 1.0-2.0
14 0.8-1.0
16 0.5-0.8
Remarks: Text in Blue means cutting simple shapes and small amount production.
Text in Red means the maximum cutting thickness, only for sampling, not for production.
Text in Pink means can use Nitrogen as assisting gas to increase cutting speed